Skip to main content

Simplicity 1605A - men's raglan shirt pattern

Can you believe that until recently I had never made my husband a shirt? I had made him some PJs, pillowcases for his body pillow and of course hemmed an untold number of pants but I'd never made him a shirt. #selfishsewist

He has an old man flannel shirt that he loves. It's vintage and made with an ultra thick flannel and he would like a replacement/second version of this shirt. So I bought some flannel, the thickest I could find but thought maybe I should try making him a simpler shirt to check how patterns fit him first.

Speaking of which, if anyone knows where I can buy the world's thickest flannel, please comment!

Getting back to this shirt, I had originally gotten husband design approval for Simplicity 2318 with the shoulder detail but then I couldn't find the pattern anywhere in my stash. Now that could mean I don't have it but more likely I just can't find it.

I did have Simplicity 1605A so I decided I would make it and alter it to have the shoulder color block. I traced off the sleeve on bee paper and hacked it, so that there would be the color blocked sleeve, similar to Simplicity 2318. This was easy to do, after tracing I just cut the piece in half based on how much of a color block I wanted and then added seam allowance to the middle seams.

Oddly enough, the main alteration I do for myself, grading from bust to hip, is the same thing I did for my husband! I graded from a size medium chest to a large hip and it fit him very nicely. I also finished the sleeves with bands, rather than hemming them to carry the contrast color through the design (you can't see the bands really in the photo).

The green fabric is a ponte knit from fabric.com and the grey shoulder pieces are scraps of French Terry from a dress I made originally purchased from Cali Fabrics.

This post contains affiliate links, if you make a purchase using one of these links this blog may receive a small commission. Thank you for your support.

Comments

Popular posts from this blog

George and Ginger 40k Sway - Pattern Review

Final product - 40k Sway George and Ginger Patterns gave the 40k Sway pattern away to celebrate having 40,000 members in their Facebook group. Look at how cute that neckline is? Of course I had to make this super cute freebie. As an extra bonus, there are directions for making a functional placket opening or faux opening. I opted for the faux placket because it's marginally easier and I have no reason that I need the opening to work but if you needed access to a port or to breastfeed, this top design would be great! I measure a size L12 (full bust 38") but I was at the top of the size range and worried it wouldn't fit in my arms so I decided to go up to an L14 and graded out to an XL16 hip. I checked my fabric stretch before sewing it as I was using a French Terry which is not always very stretchy. My fabric had 50% horizontal stretch and minimal vertical stretch (maybe 10%); the pattern says it needs 50% 2-way stretch so I thought I would be fine. Um.....no....It was way...

Made for Mermaids Aaronica - Pattern review

Hello sewing friends! It's been a hot minute since I posted anything and I think I have only made two new patterns in the meantime. Life was very chaotic last fall and I didn't have access to my sewing supplies! The horror! 😱 And since then, well, I haven't been in the mood. It happens sometimes. I recently finished the Aaronica from Made for Mermaids, serious folks, I know I started this in February at least because I had thought I'd wear it on Valentines Day because the small dots are actually little hearts. And here it is, April. Also you can see in this photo, where the bodice goes up a little in the front on the right? Yeah, that's where I accidentally sliced through it with my serger when I was attaching the skirt. Whoops. It was a bad slice too, over an inch but whatever! It happens! Enough about my slow-poke sewing, to business! Pattern instructions Overall the instructions here are good. The photos are clear. There is only one place where I possibly didn...

Ellie & Mac Feel Frisky panties - pattern review

I have been wearing my scrap panties for a while now and I have come to the conclusion that the leg elastic is often too tight so I decided I would experiment with using leg bands instead of elastic. I had a new pattern to test out too, the Ellie and Mac Feel Frisky Panties  (Afflink). Like the Megan Nielson Acacia pattern I made previously, they are a brief style panty. I haven't found a cheeky panty pattern but I have experimented a little with making my own, it still needs some fine tuning before I share it however. Fabric was DBP from Cali Fabrics. The Frisky panties come in 3 rises - low, medium and high. I made the low rise version. Alterations I made The only thing I really changed was to use leg bands instead of leg elastic. I measured the leg holes to be 28" (size XL) and cut my bands at 27 x 1.5" (used .25" seam allowance to sew bands together). I serged the bands on and the coverstiched them. Next time around I might make the bands an inch short...